Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
3
Streamer
Select
4
Multicast
Address
5
Multicast TTL
6
Multicast Port
7
Multicast
Service Name
8
Multicast ToS
Revision 2.5
February 2015
Options
239.16.33.254
1 to 255
Default is 10
10000
Range available is 1-
65535
Up to 20 ASCII
characters.
User Guide – Ver. 2.5
Notes
You choose the source that will provide
the stream from this box.
Demod 1 for example means the stream
will come from the first receiver
channel.
This text box enables you to change the
multicast address used by the unit. The
default value is 239.16.33.254. It is also
possible to Unicast by specifying a valid
destination IP address within the local
subnet range.
This is the multicast time to live value.
Default 127.
Protocols like TCP or UDP use port
numbers in the header to direct traffic
around the network. Low port numbers
are used by computer systems for
predefined tasks. For example SMPT
(for your email service) uses port 25.
A good rule is to use numbers above
10,000 to avoid conflict with existing
services.
When you set up a port number on
several computers on a network they
will all listen for packets directed to that
port.
The default values are 10000 and
10001.
The defaults are MPEG2-TS and MPEG2-
TS2.
This is an identifier for the service.
The priority for the Multicast can be set
here.
Page 6-71
Advertisement
Table of Contents
