Wave Central Axis Series User Manual page 63

Axis Series – RX User Guide
Software v2.0 and above
No Name
10 Battery
Voltage
11 TX Case
Temperature
12 TX Serial
Number
Table 6-12 – Service 1 Pane with Show Details Key
Step 15: Configure the Service List 1 Pane
Screenshot: Service List 1 Pane
Figure 6-17 Service Sub-Tab showing Service List 1 Pane
No Name
1 Available
Services
Revision 2.5
February 2015
Options Notes
Any voltage on a This field reports the current voltage of the
green or red field transmitter's battery in VDC.
background.
If the field background is green, the voltage
is within limits.
If the background shows red, then the
voltage is too low and the unit will fail to
operate correctly.
The voltage alarm threshold is set in
Global Settings>General Settings>TX
Battery Alarm(v)
Any temperature This field reports the current temperature of
the transmitter case in degrees Celsius.
Any valid electronic The ESN is used for licencing and we may
serial number ask you for this number during a support
(ESN). call for example.
Options Notes
Any Valid Service Provides a list of services which have been
recovered from the transport stream and
are available for you view.
Table 6-13 – Service List 1 Pane Key
User Guide – Ver. 2.5
Page 6-60