Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Step 2: Select Global Setup Sub-Menu
1. Use the Joystick/Confirm button to move up and down the Config menu and choose
Global Setup.
2. Press the center of the Joystick/Confirm button to select the Global Setup sub-
menu.
Step 3: Select Preset
1. Use the Joystick/Confirm button to move up and down the Global Setup sub-menu.
2. When you find Preset, press the Joystick/Confirm button to select it for editing.
Step 4: Change the Preset
1. Move the Joystick/Confirm button up and down to increase and decrease the value of
the digit.
2. Press the Joystick/Confirm button to save the new setting.
3. Press the Joystick/Confirm button again to confirm the new setting.
4. When done, press the Cancel/Back button to return to the top menu.
Revision 2.5
February 2015
User Guide – Ver. 2.5
Page 4-29
Advertisement
Table of Contents
