Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
No
Name
2
Eng. Mode
3
Spectra
Demod 1
4
Spectra
Demod 2
5
Blue On Fail
6
Logo Display
7
Show on SDI
8
Show on
Analog
Revision 2.5
February 2015
Options
Notes
Spectra
If you selected Engineering in Mode
earlier, these fields become active.
Scan
Spectra – Displays a graph on the OSD of
GPS/TX Data
the spectra being received for the antenna
selected.
Scan – Displays the frequency scanner on
the OSD similar to the display under the
frequency tab.
GPS/TX Data – Displays metadata and GPS
data from the transmitter on the OSD. The
TX must be configured to send metadata
and data must be in valid NMEA format.
A to H
The Demodulator 1 OSD Spectrum display
can be set to show antenna A to H.
A to H
The Demodulator 2 OSD Spectrum display
can be set to show antenna A to H.
Checked or
If the link is lost, a blue screen appears to
Unchecked
alert you. Some broadcasters prefer not to
have blue on fail set.
Checked or
When checked, the Logo will be displayed in
Unchecked
the OSD.
Checked or
When checked the OSD is displayed on the
Unchecked
SDI output. You may want to turn this off if
you are transmitting from this port. The
OSD is only available if an SD video service
is decoded. If the video is HD, the OSD can
only be displayed on SDI Output 2 and HD
Down conversion is enabled and selected.
Checked or
When checked the OSD is displayed on the
Unchecked
Analog output. You may want to turn this
off if you are transmitting from this port.
Table 6-19 – OSD Settings Pane Key
User Guide – Ver. 2.5
Page 6-73
Advertisement
Table of Contents
