Table of Contents
Advertisement
Axis Series – RX User Guide
Software v2.0 and above
Step 2: Understand the Preset Tab Colours
1. The green box shows which preset is currently active in the receiver.
2. The light blue tab shows presets available for you to use (There are 16).
3. The dark blue tab shows the preset you are currently editing.
Step 3: Make a Different Preset Available for Editing
1. Click on any light blue tab
2. The tab turns dark blue and you are now editing that preset
Step 4: Make a Different Preset Active on the Receiver
1. Click on any tab other than the green one.
2. Click the Apply button
3. The tab turns green and that preset is now active on the receiver.
Revision 2.5
February 2015
Figure 6-28 Preset Tab Colours
User Guide – Ver. 2.5
Page 6-78
Advertisement
Table of Contents
