Connecting Cables To The Terminal Block On The Com Port - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual
Figure 4-1 Preparing an OT terminal
(1) Cable
4.3 Connecting Cables to the Terminal Block on the COM
Port
Procedure
Step 1 Strip cables.
Figure 4-2 Stripping a cable (unit: mm)
(1) Insulation layer
Step 2 Remove the terminal block from the COM port.
Issue Draft A (2017-02-15)
(2) Heat shrink tubing
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(3) OT terminal (4) Hydraulic pliers
(2) Armored layer
4 Electrical Connection
(5) Heat gun
36