Huawei SmartLogger2000 User Manual page 130

SmartLogger2000-(10-C, 11-C)
User Manual
No Paramet
Function
. er
7 Maximum Specifies the
DC PV-PE voltage
voltage when the normal
operation mode is
used.
8 Maximum Specifies the
output highest output
voltage voltage of the PID
module when
Operation Mode
or Working
mode is set to
Normal or
Commissioning.
IMD Specifies whether
9
access the PID module
and insulation
monitor device
(IMD) can
operate in cycle
mode.
10 Periodic Specifies the
PID operating time
runtime segment of the
PID module when
the PID module
and IMD operate
in cycle mode.
11 Periodic Specifies the
IMD operating time
runtime segment of the
IMD when the
PID module and
IMD operate in
cycle mode.
Issue Draft A (2017-02-15)
Value Description
500–1500 If the PV module type is P, the parameter value indicates
V the highest DC voltage between PV+ and PE. If the PV
module type is N, the parameter value indicates the
highest DC voltage between PV– and PE.
PID01: If the offset mode is PV/PE, the parameter value indicates
0–500 V the highest DC output voltage between PV and PE. If the
offset mode is N/PE, the parameter value indicates the
highest DC output voltage between N and PE.
SartPID2  For the 1000 V/1100 V SUN2000, the value ranges
000: from 0 V to 550 V. The parameter value indicates the
0–800 V maximum DC raise voltage between PV and the
ground.
 For the 1500 V SUN2000, the value ranges from 0 V
to 800 V. The parameter value indicates the maximum
DC raise voltage between PV and ground.
The default value is 500 V. For the 1500 V SUN2000, the
recommended value is 800 V.
Select Enable if you allow the PID module and IMD
Enable
operate in cycle mode.
Only the IMDs of mainstream suppliers such as DOLD
and BENDER are supported, and the IMDs must have
enabled dry contacts.
NOTICE
Only when IMD access is set to Enable, can you set Periodic
PID runtime, Periodic IMD runtime, and IMD control dry
contact.
Disable Select Disable if you forbid the access of IMDs.
60–480 The IMD is shut down when the PID module is operating.
minutes
15–480 The PID module is standby when the IMD is operating.
minutes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
122