SmartLogger2000-(10-C, 11-C)
User Manual
Figure 8-3 Local scheduling
Active Power Control
The SmartLogger provides simplified local active power percentage configuration as well as
the local power control automation, that is, to automatically adjust the active power derating
percentage in different periods of the day.
Because of permission restriction, log in as Special User. Choose Settings > Active Power
Control to access the target page.
The function takes effect only when Active Power Control is set to Enable.
Issue Draft A (2017-02-15)
If the SUN2000s are allowed to run overloaded, set Active Power Control Mode to
Disable active power reduction.
If the maximum output power of the SUN2000s should be controlled, set Active Power
Control Mode to Percentage fix limitation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Power Grid Scheduling
166