Huawei SmartLogger2000 User Manual page 158

SmartLogger2000-(10-C, 11-C)
User Manual
Port
DI3
DI4
DI5
DI6
DI7
DI8
GND2
Before setting the function of remote shutdown over dry contacts in the following way, ensure
that the involved DI port is not set in
Because of permission restriction, log in as Special User. Choose Settings > Dry Contact
Remote Shutdown to access the target page.
Figure 7-69 Remotely shutting down SUN2000s in dry contact mode

Issue Draft A (2017-02-15)
Function
DI_3
DI_4
DI_5
DI_6
DI_7
DI_8
Dry contact input common terminal 2, used for reactive power compensation
for DI5–DI8
The OVGR sends dry contact signals and can be connected to any DI of the SmartLogger. Set
related parameters based on the actual connection. Otherwise, the functions cannot be implemented.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.9.6 Setting DI Parameters.
7 WebUI
150