Setting The Lvrt Characteristic Curve; Plc; Querying Related Information - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual

7.7.3.5 Setting the LVRT Characteristic Curve

Because of permission restriction, log in as Special User. Choose Monitoring > SUN2000 >
LVRT Characteristic Curve and set the characteristic curve on the displayed page.
Figure 7-25 Setting the LVRT characteristic curve

7.7.4 PLC

The SmartLogger is integrated with the PLC CCO and connected to the SUN2000 that
supports the PLC function over an AC power cable. Data is transmitted over the power cable
to implement PLC networking.

7.7.4.1 Querying Related Information

Choose Monitoring > PLC and query related information on the displayed page.
Issue Draft A (2017-02-15)
You can click the Select icon in the upper left corner of the page to select a setting page.
Only the
SUN2000-33KTL-JP/40KTL-JP/33KTL-US/36KTL-US/40KTL-US/36KTL/42KTL/43KTL-IN-C1/50
KTL/50KTL-C1 and SUN2000-60KTL-HV-D1 support the LVRT characteristic curve, and other types
of SUN2000s do not have this function.
After you set the LVRT characteristic curve for one SUN2000, click Batch configurations to
synchronize the LVRT characteristic curve settings to other SUN2000s.
After connecting the AC power cable to the SmartLogger, set Buil-in PLC to Enable. For details, see
7.10.7.1 Connecting Devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
110