SmartLogger2000-(10-C, 11-C)
User Manual
7.10 Maintenance
7.10.1 Firmware Upgrade
You can upgrade the firmware of the SmartLogger, SUN2000, PLC module, or PID module
over the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose
Maintenance > Firmware Upgrade to access the target page.
Figure 7-71 Firmware upgrade
Single Upgrade
1.
2.
The Single Upgrade mode does not apply to two or more types of devices each time. For
example, you cannot select both the SUN2000 and PLC module.
3.
Issue Draft A (2017-02-15)
If a DI port is activated, it cannot be set in
Mode. If a DI port has been set in
cannot be set here again.
Click Single Upgrade.
Select the name of the device that requires a firmware upgrade.
Select the upgrade file.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.9.5 Remotely Shutting Down SUN2000s in Dry Contact
7.9.5 Remotely Shutting Down SUN2000s in Dry Contact
7 WebUI
Mode, it
152