Page 1
Huawei Atlas 500 Technical White Paper Issue Date 2019-08-05 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
Technical White Paper About This Document About This Document Purpose This document describes the Atlas 500 AI Edge Station (Atlas 500 for short) in terms of its appearance, features, and specifications. Intended Audience This document is intended for: Huawei presales engineers...
1.4 Typical Application Scenarios 1.1 Product Overview The Atlas 500 is a lightweight edge device designed for a wide range of edge applications. It features powerful computing performance, large-capacity storage, flexible configuration, small form factor, wide temperature range, strong environment adaptability, and easy maintenance and management.
1 Introduction Figure 1-1 Atlas 500 (without a drive) Figure 1-2 shows an Atlas 500 with a 3.5-inch drive in the drive module on the right. Figure 1-2 Atlas 500 (with a drive) 1.2 Product Features Ease of Use in Edge Scenarios Real time: Data is processed locally and response is returned in real time.
The system detects software and hardware faults and generates alarms. The system provides the HA solution with built-in HA backup software. Two Atlas 500 edge stations can form an HA system. If one Atlas 500 is faulty, a failover is automatically triggered.
Figure 1-3 Atlas 500 system architecture 1.4 Typical Application Scenarios The Atlas 500 can be used in many scenarios, including Safe City, Smart Security Supervision, Smart Transportation, Smart Manufacturing, Smart Retail, and Smart Care. In these application scenarios, the typical architecture is as follows: Device: IP cameras or other front-end devices are connected in a wireless or wired way.
Page 14
Description Table 2-3 Description of ports on the rear panel Name Type Quantity Description Antenna SMA-K Used to connect antennas to the Atlas 500. port (screw threads outside and a hole inside) Phoenix Used to connect an alarm input device such as a...
Page 15
The 2-pin DC input terminal adopts a foolproof design. If the positive and negative poles are reversely connected, the device cannot be powered on. The Atlas 500 installation accessory package provides a 2-pin power cable terminal. The DC power cable specifications must be 1.5 mm...
Page 22
SDR50 and a maximum capacity of 2 TB l One slot for a 2280 SATA M.2 SSD NOTE l The Atlas 500 supports a wide temperature range. If a microSD card or M.2 SSD is required, it must meet temperature requirements.
Power supply 12 V DC, with an external power adapter 3.2 Environmental Specifications Table 3-2 Atlas 500 environmental specifications Item Specifications Operating temperature l Without a drive: -40°C to +70°C (-40°F to +158°F) l With a drive: -40°C to +60°C (-40°F to +140°F)
Surge protection: The surge protection level of the RS232 port for dual-live wire to the ground the level between the two wires are both ±4 kV (criterion C). 3.3 Physical Specifications Table 3-3 Atlas 500 physical specifications Item Specifications Dimensions (H x W x D) l Without a drive: 45 mm x 235 mm x 220 mm (1.77 in.
Huawei Atlas 500 Technical White Paper 3 Product Specifications 3.4 PSU Specifications Table 3-4 Atlas 500 PSU specifications Item Specifications Input l Rated power input range – AC: 100 V to 240 V, 50 Hz or 60 Hz, 2 A –...
Certificate management System maintenance, including firmware upgrade, system restart, and log collection Edge-cloud synergy HA solution: Two Atlas 500 edge stations can form an HA system. If one Atlas 500 is faulty, a failover is automatically triggered. Functions Table 4-1 Atlas IES functions...
Page 35
Figure B-2 PSU panel Table B-1 PSU panel description Name Description 2-pin DC output port Connects the PSU to the Atlas 500 through a 2-pin cable. AC/DC input port Connects the PSU to the external power supply system through a 3-pin cable.