ZOLL E Series Service Manual page 127

S O2 Board Removal (MS-11)
P
1. Remove the 2 flat cables from the SPO2 board by pulling
straight away from board.
S O2 Board Removal (MX-1)
P
1. Remove the 2 flat cables from the SPO2 board by pulling
straight away from board.
9650-1450-01 Rev. D
2. Remove the 4 screws from each corner of the SPO2 board.
Remove the SPO2 board from the device.
2. Remove the 4 screws from each corner of the SPO2 board.
Remove the SPO2 board from the device.
E Series Service Manual
5-17