Jt1000 Configuration Options - Motorola HT 1000 User Manual

JT1000
Configuration
Options
DCBC
Function Key Descriptions
F5 - PRINT
F9 - DEFAULT
Field Definitions
User Programming
Programming Password
80
At the MAIN MENU, press F4, F3, F2 and then F3 to access this screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model : H01SDH9PA3AN
Serial:
...RADIO:SYS CONFIG:JT1000 OPTIONS
User Programming..............Enabled
Programming Password...........581000
Menu Timeout Period (sec)..........15
Auto-backlight................Enabled
Backlight timer (sec)...............5
F1 F2 F3 F4
HELP
This menu allows you to modify the system configuration for JT1000
radios only. This screen will NOT be accessible for HT 1000 or VISAR radio
models.
Prints the current system configuration.
Resets the fields on this screen to their default values.
Use the UP/DOWN arrow keys to enable or disable User Programming
mode. If this feature is enabled, the radio user will be able to program
frequency, squelch coding, power, and bandwidth, and will also be
able to use the Multi-Select PL/DPL feature.
Note that user programming can also be enabled/disabled on a
channel-by-channel basis by configuring this field on the CHANNEL
CONFIGURATION screen (F4/F4).
Note: When User Programming Mode is enabled, Normal Dispatch
Operation will be disabled, and the radio will not unmute to channel
traffic. The menu timeout feature will prevent the radio from
remaining in this state for an extended period.
The default is Enabled.
This feature allows you to restrict access to programming for
frequency, squelch coding, power, and channel bandwidth. The
password is limited to 8 numeric characters or less. The minimum
password length is one character. To set a password of less than 8
characters, be sure to use the Del key to remove any excess digits.
Spaces are not allowed as part of the password.
The default is 581000.
Use <: keys to scroll values.
Use <Enter> to go to next feature.

JT1000 CONFIGURATION OPTIONS

----------------------------
Alert Tones....................Enabled
Freq. Range Low Limit............450.0
Freq. Range High Limit...........512.0
Display Format.........Channel Number
TX Power w/Alkaline Batt...Always Low
F5 F6 F7
PRINT
F8 F9 F10
DEFAULT EXIT