Motorola HT 1000 User Manual page 126

PTT ID Sidetone
Kani Group Call Encode
Select Call LED
Call Alert LED
Paging Initiation
Paging Cancel
120
Use the UP/DOWN arrow keys to enable or disable this feature. If this
field is enabled, a sidetone will be generated during encoding of a Stat-
Alert PTT-ID and a STAR PTT-ID.
The default is Enabled.
Use the UP/DOWN arrow keys to enable or disable this feature. If this
field is enabled, the ATIS Kani Group Call portion of the ATIS
signalling data will be encoded. If this field is disabled, the ATIS Kani
Group Call portion of the data packet will be omitted from the
transmission. This portion of the data packet helps to prevent voice
falsing in congested RF environments by requiring Kani Group
numbers to match as well as requiring correct squelch coding before
the radio will unmute to channel traffic.
The default is Disabled.
Use the UP/DOWN arrow keys to enable or disable this field. When
this feature is enabled, the green LED (located on top of an HT 1000 radio
or the front of a VISAR radio) will flash when a Select Call is received.
The LED will flash for the entire length of the message. This field
controls the LED for Quik-Call II, MDC, and ATIS Select Call.
The default is Enabled.
Use the UP/DOWN arrow keys to enable or disable this field. When
this field is enabled, the green LED (located on top of an HT 1000 radio
or the front of a VISAR radio) will flash when a Call Alert is received. The
LED will flash until the alert tones terminate. This field controls the
LED for Quik-Call II, MDC, and ATIS Select Call.
The default is Enabled.
Paging Initiation is mutually exclusive with Paging Cancel and Select Call.
If Paging Initiation is enabled, these other fields will be disabled. Use the
UP/DOWN arrow keys to enable or disable this field. If this option is
enabled and an ATIS transmission is sent with Paging Initiation
enabled, the destination radio will generate Call Alert beeps if the
radio ID matches.
The default is Disabled.
Paging Cancel is mutually exclusive with Paging Initiation and Select Call.
If Paging Cancel is enabled, these other fields will be disabled. Use the UP/
DOWN arrow keys to enable or disable this field. If this option is
enabled and an ATIS transmission is sent with Paging Cancel enabled,
the destination radio will stop Call Alert beeps if the radio ID matches.
The default is Disabled.