Motorola HT 1000 User Manual page 187

Field
Scan List Channels Allows channels to be entered into Scan List
Scan Type Selects whether Scan is priority or not
PL Scan Selects how radio scans for PL
Priority Chan Unmute Forces Selective Call Logic to true on Priority
Channel
Priority Chan Defn Selects how the Priority Channel is determined
Fixed Priority Chan Selects a specific Priority Channel for Fixed
Priority
Designated Tx Selects a specific channel for all transmissions in
Channel Scan
Talkback Scan Enables Scan Talkback
Scan Channel Drops channels from Scan List if they have wrong
Lockout PL
PL Defeat Allows Permanent Monitor while in Scan
Nuisance Delete Allows deleting of channels with undesirable
activity
Sel Chan Unmute Forces Selective Call Logic to true on all Scan
channels
Quik-Call II Scan Enables Quik-Call II Decoder in Scan on Quik-call
II-enabled channels
MDC Decode Scan Enables MDC Decoder in Scan on MDC-enabled
channels
MDC Sel Cal Scan Enables scanning for MDC Sel Cal on MDC-
enabled channel
Tx/ Rx Hangtime (Sec) Sets time radio hangs on channel after activity
Stops
Side Button Assign Scan/Scan Programming functions to side
Assignment buttons
Chan Slaved Auto Dedicates Channel Selector position to turn Scan
Scan On/Off
Scan Programming Enables tone when entering/exiting Scan
Alert programming
Priority Chan Lock Enables tone when activity detected on Priority
Alert Channel
Scan Signalling
Function Location
CHANGE:RADIO:SCAN LIST
SCAN LIST
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SCAN:CONFIG
CHANGE:RADIO:SIDE BUTTON
CHANGE:CHANNEL: OPT
CHANGE:RADIO:ALERT TONE
CONFIG
CHANGE:RADIO:ALERT TONE
CONFIG
181