Transmit Deviation Limit Alignment: Mdc-1200 Signalling - Motorola HT 1000 User Manual

Transmit Deviation
Limit Alignment:
MDC-1200
Signalling
BDC
Function Key
Descriptions
F6 - TOGGLE PTT
F8 - PROGRAM VALUE
Field Definition
New Softpot Value
48
From the MAIN MENU, press F2, F4 and then F3 to access this screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model:
Serial:
SERVICE:SIG ALIGN:XMIT DEV MDC
Transmit Deviation Limit Alignment: MDC 1200 Signalling
-------------------------------------------------------
Test Current
Frequency Value
136.02500 21
0
MIN |----+----+----+----+----+----+----+--X-+----+----+----+----| MAX
F1 F2 F3
HELP
This screen reads the radio codeplug, then displays the frequency on
the left side of the screen, and to the right of it the MDC-1200 setting.
On the far right side of the screen, the MDC-1200 softpot number is
displayed. The bar at the bottom of the screen shows the current
setting in relation to the minimum and maximum settings. Press F6 to
toggle PTT. Press F8 key to program the value into the radio.
Refer to your Radio Service Manual for the Transmit Deviation Limit
Alignment: MDC-1200 Signalling procedure.
These procedures should be attempted only by
!
qualified service personnel. Failure to perform
alignment procedures properly may result in seriously
Caution
degraded radio or system performance.
Toggles PTT.
Programs the selected value into the radio.
This is the squelch attenuator softpot value for this frequency. The
status bar shows the relationship between this setting and the
minimum and maximum settings.
Use <: or <SHIFT><<SHIFT>:keys
to change softpot.
New Softpot Value: 21
F4 F5 F6 F7
TOGGLE
PTT
31
F8 F9 F10
PROGRAM EXIT
VALUE