Service Menu Functions
Servicing the Radio
Using the RSS
Menu Map
SERVICE MENU
This section contains instructions on how to use each of the SERVICE
MENU related screens and procedures to align the radio. Detailed
alignment procedures and service instructions are included in the HT 1000,
JT1000 or VISAR Radio Service Manual and are therefore not included in
this manual. Refer to the relevant Service Manual for all alignment
values and procedures.
Note: All functions (supported and unsupported) will be
displayed in the menu's working area. The unsupported
functions (based on the radio's model or options) will NOT be
displayed in the F-key ID area.
B
Transmit Alignment Menu
B
Reference Frequency Alignment
C
Transmit Power Alignment
D
Transmit Deviation Balance (Compensation)
Alignment
E
Transmit Deviation Limit Alignment
F
Transmit Deviation Limit Alignment:
Reference Softpot
G
Transmit VCO Crossover Alignment
C
Receiver Alignment Menu
B
Front End Bandpass Filter Alignment
C
Rated Audio Alignment
D
Squelch Alignment (25/30 kHz)
E
Squelch Alignment (20 kHz)
F
Squelch Alignment (12.5 kHz)
G
VCO Crossover Alignment
C
Signalling Alignment Menu
B
MDC Deviation Alignment
C
DTMF Deviation Alignment
D
Single Tone Deviation Alignment
F
Test Mode
G
Controller Board Initialization
2
21