Motorola HT1000 Quick Reference Card

Getting Started

Install the antenna, battery, and belt clip.
Turn the radio on (or off), by using the On/Off Volume con-
trol.
To monitor and adjust volume, press side button 3 (SB3,
monitor button) and adjust the On/Off Volume control for a
comfortable listening level.
To receive:
turn the radio on, select the desired channel, and monitor for
activity. Selecting a blank channel causes an error tone.
To transmit:
turn the radio on, select the desired channel, and monitor for
activity. When clear, press the PTT (LED lights red) and speak
into microphone area. Release PTT to receive.
Channel Scan™
Three types of channel scan are offered:
• Auto Scan (AS)
• Preprogrammed Scan (PS)
• Operator Selectable Scan (OSS)
To turn scan on, turn the radio on and:
• AS- rotate the channel selector to the preprogrammed scan channel.
• PS- and OSS- place the ABC switch in the C position.
In AS and PS radios, the priority channel is preprogrammed and is not user programma-
ble. In OSS radios, the priority channel is user programmable and is the channel that the
channel selector knob is on.
To temporarily delete a nuisance channel from the scan list, press SB1 when locked on
to that channel. The channel is put back into the scan list upon turning scan off and re-
entering into scan.
For OSS radio programming information, refer to your operating instructions manual.
Stat-Alert™ Signalling Features
PTT-ID is a per-channel feature. An ID code is sent each time the PTT is pressed.
Emergency Alarm is a per-radio feature. An emergency code is
transmitted when the emergency button is pressed. The emer-
gency alarm cancels when:
• the PTT is pressed,
• the emergency button is long pressed, or
• when the radio is turned off.
HT 1000™ Portable Radios
Quick Reference Card
*6881088C01 *
Side Button
(SB)
SB1
MAEPF-22063-A
SB2
SB3
PTT
MAEPF-26293-O
Emergency
Button
MAEPF-26295-O
68P81088C01-O