Motorola HT 1000 User Manual page 99

Mandown Pre-Alert
Tx Low Battery Alert
Rx Low Battery Alert
Low Battery Alert Intvl (sec)
Alert Volume Tx
Alert Volume Rx
This field is applicable to HT 1000 radios only since the Mandown Switch
is an optional external accessory used only with HT 1000 radios. If this field
is set to Enabled, an alert tone will be generated before the radio enters
Mandown Emergency alert state. This allows time for the user to
return the radio to proper upright position before a Mandown
Emergency alert is actually sent (that is, if the tipped angle of the radio
was accidental and there was no emergency situation).
The default is Enabled.
Use the UP/DOWN arrow keys to enable/disable this feature. If this
feature is enabled, this alert tone will be generated on PTT de-key only
when a low battery condition is detected while the radio is in the
transmit mode.
The default is Enabled.
Use the UP/DOWN arrow keys to enable/disable this feature. If this
feature is enabled, an alert tone will be generated periodically when a
low battery condition is detected while the radio is in the receive
mode.
The default is Enabled.
Enter a value directly or use the UP/DOWN arrow keys to select the
interval of silence between low battery alert tones. The valid range of
values is 5 to 155 seconds. The value you enter will automatically be
rounded off to multiples of 5 seconds.
The default is 120 seconds.
Enter a value directly or use the UP/DOWN arrow keys to select the
fixed volume setting for any alert tone sounded while in Transmit
mode. Volume settings for alert tones can range from one to 255 and
are fixed at that volume (with one being the minimum volume and
255 being the maximum volume). If you set this field to Volume Knob,
the alert volume will be the same as the volume pot setting.
The default is 176.
Enter a value directly or use the UP/DOWN arrow keys to select the
fixed volume setting for any alert tone sounded while in Receive
mode. Volume settings for alert tones can range from 1 to 255 and are
fixed at that volume (with one being the minimum volume and 255
being the maximum volume). If you select Volume Knob, the alert
tone will be the same as the volume pot setting.
The default is 176.
93