Motorola HT 1000 User Manual page 22

Function Key Descriptions
F1 - HELP
F2 - SERVICE
F3 - GET/SAVE
F4 - CHANGE/VIEW
F5 - PRINT
F9 - SET UP
F10 - EXIT TO DOS
16
Provides additional information on this screen. Generic help is
available within any help screen in the form of the MORE HELP
function. Within a HELP screen, press F1 for more help, F2 for
keyboard help, F5 to print the current help screen, and F9 for other
help (if available). Press F10 to exit help.
A multi-level menu that permits access to all radio service alignments
through the service screens. A radio must be connected to the
computer via the RIB before access will be permitted to the SERVICE
screens. Refer to Section 2 for detailed information on the SERVICE
screens.
A multi-level menu used to read codeplug data from a radio and/or
retrieve-archived codeplug data from a diskette or hard disk for editing
purposes. The GET/SAVE/CLONE/PROGRAM function is also used to
program edited codeplug data back into the radio or to create an
archive file on a disk. Refer to Section 3 for detailed information on
GET/SAVE/CLONE/PROGRAM screens.
A multi-level menu that is used to change or view codeplug features
and option configurations. Unlike the SERVICE function, a codeplug
must be loaded into the computer's memory using GET/SAVE/CLONE/
PROGRAM functions before you will be allowed to access CHANGE/
VIEW functions. An archive file can be accessed without a radio being
connected. Refer to Section 4 for detailed information on the
CHANGE/VIEW screens.
A sub-menu through which you can print various categories of
codeplug data. Refer to Section 5 for detailed information on the Print
screens.
A screen from which you can customize default disk drives, set up the
communication port (COMport) that the computer will use to
communicate with the radio, and select screen colors to suit your
specific needs. Refer to page 17 in this section for detailed information
on the SET UP COMPUTER CONFIGURATION screen.
Used to quit the program and return to DOS. When you press F10 at
the MAIN MENU, the RSS will prompt you to press F2 to exit to DOS
or F10 to return to the MAIN MENU.
Note: Make sure that any desired codeplug changes you made
have been programmed back to the radio and/or that an archive
copy of this information has been made. Once you exit the RSS,
all the information in the workspace will be lost.