Transmit Deviation Limit Alignment; Figure 7 Transmit Deviation Limit Alignment Screen - Motorola ASTRO DIGITAL XTS 3000 series Basic Service Manual

Transmit
Deviation
Limit
Alignment
18
F
7. Press . This will cause the radio's DSP IC to change the injection tone
to 3kHz, 100mVrms. Use the
within ±2% of the value recorded in step 5.
8. Repeat steps 4-7 until the 3kHz tone deviation is within ±2% of the 80Hz
tone deviation.
F
9. Press again to dekey the radio.
H
10.Press to program the new softpot value.
11.Repeat steps 3-10 for the remaining frequencies.
J
12.Press once to return to the TRANSMITTER ALIGNMENT MENU, or
J
press twice to return to the SERVICE MENU.
IMPORTANT NOTE:
Put the radio in the RF test mode and scroll to
the ASTRO test environment, indicated by
"AST"
"Performance Checks" section for details). All
other deviation values are derived from the
ASTRO test environment mode transmit
deviation limit.
1. From the SERVICE MENU, press
ALIGNMENT MENU.
E
2. Press to select the TRANSMIT DEVIATION LIMIT alignment screen.
The screen will indicate the transmit frequencies to be used. See Figure 7.
MOTOROLA Radio Service Software
ASTRO Model: H09UCH9PW7AN
MAIN:SERVICE:TX ALIGN:VCO ATTN
Frequency
---------
806.000
815.000
824.000
851.000
860.000
869.000
0
MIN |----+----+----+----+----+----+----+----+X---+----+----+----| MAX
F1 F2
HELP

Figure 7 Transmit Deviation Limit Alignment Screen

P Z
3. Press (or
the lowest frequency shown).
F
4. Press to key the radio. Then use the
deviation per the values shown in Table 11.
É Ç
/ arrow keys to adjust the deviation to
on the display (refer
B
to select the TRANSMITTER
Use UP/DOWN Arrows To Adjust Softpot.
TRANSMIT DEVIATION LIMIT
------------------------
Current
Value
-------
175
175
180
180
180
180
Transmitter..Off
F3 F4 F5 F6
TOGGLE
PTT
or [RETURN]) to select a frequency field (starting with
É
to the
New Softpot Value
-----------------
175
175
180
180
180
180
F7 F8 F9
PROGRAM
VALUE
Ç
/ arrow keys to adjust for a
255
F10
EXIT