KEB combivert B6 Installation Manual page 4

This manual describes the KEB COMBIVERT B6. Particular attention is paid to the in-
stallation, the connection as well as the basic operation. Due to the various application
and programming possibilities, the application-specific connection and/or wiring diagram,
the parameter adjustment as well as instructions to the start-up are to be taken from the
documentation of the machine manufacturer.
A list of instruction manuals and documents giving assistance for the construction, docu-
mentation and service is provided at the end of this manual. The safety and warning notes
listed in this instruction manual as well as in other documentation must be observed at
any rate to ensure a safe operation. The safety and warning instructions specified in this
manual do not lay claim on completeness. The KEB Automation KG reserves the right to
change/adapt specifications and technical data without prior notice. The used pictograms
have following significance:
The information contained in the technical documentation, as well as any user-specific advice
in spoken and written and through tests, are made to best of our knowledge and information
about the application. However, they are considered for information only without responsibi-
lity. This also applies to any violation of industrial property rights of a third-party.
Inspection of our units in view of their suitability for the intended use must be done generally
by the user. Inspections are particulary necessary, if changes are executed, which serve
for the further development or adaption of our products to the applications (hardware,
software or download lists). Inspections must be repeated completely, even if only parts
of hardware, software or download lists are modified. Original spare parts and authorized
accessories by the manufacturer serve as security. The use of other parts excludes liability
for the damages which can result from it.
Application and use of our units in the target products is outside of our control and
therefore lies exclusively in the area of responsibility of the user.
Unauthorised opening and tampering may lead to bodily injury and property damage and
may entail the loss of warranty rights.
GB - 4
Danger
Warning
Caution
Attention
observe at
all costs
Information
Aide
Tip