VERITAS NetBackup 523 Installation Manuals page 63

Adding the disk space of additional Veritas Storage Shelf units to an operational NetBackup 52xx appliance
7
Navigate to the Storage view.
From the Storage menu, enter Add and press Enter. It displays the disks that
are in a New Available state and can be added. Copy a disk ID that is
displayed.
8
At the prompt, enter add <disk ID> and press Enter. <disk ID> is the disk ID
that you copied. Repeat step 7 and 8 to add each disk ID that is displayed.
9
View the available storage space as follows:
Navigate to the Storage menu.
■
At the prompt, enter Show Disk and press Enter. The status of the newly
■
added disks is displayed as In Use and space in the Unallocated column
is the disk space available for the new disk.
Adding storage shelves
from the NetBackup Appliance Shell Menu
63