Volkswagen Touareg 2003 Workshop Repair Manual page 77

21 - 10 Nm
22 - 25 Nm
23 - Oil suction pipe
❑ For sump, upper part
Installation position of oil pump chain drive sprocket
– Fit chain sprocket onto oil pump shaft. The flattened side
-arrow- faces oil pump shaft and the inscription on the chain
sprocket faces towards front.
1.4.1 Removing and installing oil pump
Special tools and workshop equipment required
♦ Engine and gearbox support -VAS 6095-
♦ Locking pin -T40011-
♦ Silicone sealant D176 501A1
♦ Eye protection
Prerequisites
• Engine removed
• Engine is secured on engine and gearbox support -VAS
6095- .
Removing
– Drain engine oil from lower part and upper part of sump.
Note
Observe environmental regulations for disposal.
– Remove engine mounting on right
– Now the oil filter housing can be removed
⇒ Item 12 (page 69)
– Unscrew bracket for dipstick guide tube -1- from cylinder head
and pull out guide tube.
⇒ Item 18 (page 70)
.
8-cylinder injection engine - Edition 11.2011
.
1. Removing and installing parts of lubrication system
Touareg 2003 ➤
71