Removing And Installing Poly V-Belt - Volkswagen Touareg 2003 Workshop Repair Manual

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
Specified torque for engine bracket
Specified torque for securing bolt -1-: 60 Nm.
Specified torque for securing nut -2-: 75 Nm.
1.3

Removing and installing poly V-belt

Special tools and workshop equipment required
♦ Locking pin -T10060 A-
Removing poly V-belt
– Remove noise insulation tray.
– Mark direction of rotation of poly V-belt.
– Turn spanner clockwise until tensioning element can be
locked using locking pin -T10060 A- .
– Remove poly V-belt.
Installing poly V-belt
Note
Before installing poly V-belt, ensure that all ancillary assem‐
♦
blies (alternator, air conditioner compressor, vane pump) are
secured tightly.
♦ Check that idler roller turns easily.
When installing poly V-belt, check direction of belt rotation and
♦
proper seating of belt in pulleys.
18
Rep. gr.13 - Crankshaft group