Volkswagen Touareg 2003 Workshop Repair Manual page 152

Hide thumbs Also See for Touareg 2003:
Table of Contents

Advertisement

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
– Connect connector of diagnosis cable -VAS 5051/1- or -
VAS 5051/3- to diagnostic connection.
– Start engine and run at idling speed.
Only when engine does not start:
– Switch on ignition.
Selecting operating mode:
– Press button on display for „Vehicle self-diagnosis".
Selecting vehicle system:
– Press „01 - Engine electronics" button on display.
The control unit identification with code as well as chassis number
and immobilizer identification number will be indicated on the dis‐
play.
Note
A print-out can be made if required. Tghen press the
ton.
– Press
button.
Select diagnostic function:
– Press „02 - Read fault memory" button on display.
– If no fault is stored in engine control unit „0 fault detected" is
displayed.
– If faults are stored in the engine control unit, these are shown
one below the other on the display.
– Press
button.
– Press „05 - Clear fault memory" button on display.
– Select „06-End output" function.
146
Rep. gr.24 - Mixture preparation - injection
but‐
Print

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents