Volkswagen Touareg 2003 Workshop Repair Manual page 14

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
– Install front supports -VAS 6131/6-1- left -1-, as well as -
VAS 6131/6-2- right -2- on the assembly platform. Arrows on
the supports point forwards. Secure the bolts in the following
positions: left support -1-: A5, B4 and B5. Right support -2-:
G4, H4 and H5
– Bolt both suspension supports -3- -VAS 6131/6-3- and
6131/6-4 to the assembly platform in the following positions:
left suspension support -3-: A6 and C6. Right running gear
support -3-: F6 and H6
– Screw the suspension support turntables down.
– Place supports -4- (VAS 6131/6-5) for subframe and -5- (VAS
6131/6-6) for gearbox console in appropriate positions on as‐
sembly platform.
– Position assembly platform horizontal under engine/gearbox
assembly. Supports -1- must be guided into corresponding
receptacles on left and right -arrow-.
– At the same time, guide right and left mountings for gearbox
bracket into corresponding holes -arrow-. When all four sup‐
ports are in the receptacle holes without pressure:
– Screw the two rotating plates of running gear supports under
the suspension links applying a small amount of pre-tension.
– Guide supports -2- into their respective receptacles in sub‐
frame, correcting support height as necessary with knurled
nuts.
8
Rep. gr.10 - Removing and installing engine