Volkswagen Touareg 2003 Workshop Repair Manual page 41

Special tools and workshop
equipment required
♦ Locking pin -3242-
♦ Two-arm puller -T40001-
♦ Camshaft clamp -T40005-
♦ Tensioner wrench -
T40009-
♦ Locking pin -T40011-
♦ Reversible ratchet -VAS
5122-
♦ Torque wrench -V.A.G
1410-
♦ Torque wrench -V.A.G
1331-
1.4.1 Removing
Caution
When doing any repair work, especially in the engine compart‐
ment, pay attention to the following due to the cramped condi‐
tions:
♦ Route all the various lines (e.g. for fuel, hydraulics, acti‐
vated charcoal filter system, coolant, refrigerant, brake
fluid and vacuum) and electrical wiring in their original po‐
sitions.
♦ To avoid damage to lines, ensure sufficient clearance to
all moving or hot components.
– Remove insulation tray ⇒ General body repairs, exterior; Rep.
gr. 50 ; Noise insulation
– Remove radiator fans with radiator fan support
– Bring lock carrier into service position ⇒ General body repairs,
exterior; Rep. gr. 50 ; Body - front; Lock carrier service posi‐
tion .
8-cylinder injection engine - Edition 11.2011
⇒ page 79 .
Touareg 2003 ➤
35
1. Cylinder head