Volkswagen Touareg 2003 Workshop Repair Manual page 51

Special tools and workshop
equipment required
♦ Drip tray -V.A.G 1306-
♦ Torque wrench (5...50 Nm)
-V.A.G 1331-
♦ Torque wrench (40...200
Nm) -V.A.G 1332-
♦ Spring-type clip pliers -VAS
5024A-
Not illustrated:
♦ Cable ties
Prerequisite
• The engine must be no more than warm to touch.
1.6.1 Removing
– Remove engine ⇒ page 2
Caution
When doing any repair work, especially in the engine compart‐
ment, pay attention to the following due to the cramped condi‐
tions:
♦ Route all the various lines (e.g. for fuel, hydraulics, acti‐
vated charcoal filter system, coolant, refrigerant, brake
fluid and vacuum) and electrical wiring in their original po‐
sitions.
♦ To avoid damage to lines, ensure sufficient clearance to
all moving or hot components.
.
8-cylinder injection engine - Edition 11.2011
Touareg 2003 ➤
45
1. Cylinder head