Volkswagen Touareg 2003 Workshop Repair Manual page 33

– Remove thrust washer from crankshaft journal and mark thrust
washer front face -arrow- using a waterproof felt-tip marker.
Installing
– Remove oil residue from crankshaft journal and thrust washer
using a clean cloth.
– Press new seal in to stop using thrust piece -T40007- .
– Reverse thrust washer and fit it on crankshaft journal with
marked front face towards engine.
– Install crankshaft toothed belt pulley using a new centre bolt.
Specified torque: 200 Nm +
– Install toothed belt. ⇒ page 34
– Install poly V-belt ⇒ page 18
– Install noise insulation tray.
1
/ 2 turn (180°) further.
.
8-cylinder injection engine - Edition 11.2011
2. Removing and installing sealing flange and drive plate
Touareg 2003 ➤
27