Volkswagen Touareg 2003 Workshop Repair Manual page 16

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
– Attach lifting tackle -3033- as shown in illustration and lift en‐
gine from scissor-type assembly platform using workshop
crane -VAS 6100- .
– Lift engine using workshop crane -VAS 6100- until the centre
of the flywheel is at the same height as the assembly plate of
the engine and gearbox support -VAS 6095- . Then bolt sup‐
port to cylinder block as shown in the illustration using univer‐
sal fastening elements.
1.1.2 Notes on installing
Note
When fitting engine and gearbox to body, it is essential to position
engine carrier against body with the aid of scissor-type assembly
platform -VAS 6131- . »Pulling up« engine carrier with securing
bolts will damage threads.
Procedure
Install in reverse order. In the process, note the following:
When the engine has been separated from the gearbox:
– Check whether dowel sleeves for centring engine/gearbox are
in cylinder block and install if necessary ⇒ 5-speed automatic
gearbox 09D, four-wheel drive; Rep. gr. 37 ; Removing and
installing gearbox .
If subframe with engine carrier has been removed from assembly
platform:
10
Rep. gr.10 - Removing and installing engine