Volkswagen Touareg 2003 Workshop Repair Manual page 52

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
– All cable ties which are opened or cut open when engine is
removed must be replaced in the same position when engine
is installed.
– Remove front exhaust pipe from exhaust manifold
⇒ page 148 .
– Disconnect connectors -1-, -2- and -3-.
– Remove toothed belt
– Remove camshaft pulley
tensioning toothed belt.
– Remove idler roller -1-.
– Loosen securing bolts -arrows- and remove rear toothed belt
guard.
– Disconnect connectors from knock sensors.
– Pull connectors off all injectors.
– Remove bolts securing coolant pipe -arrow-.
– Disconnect connector -1-.
– Disconnect hose -2-.
– Disconnect connector -4-.
– Remove bolts -6-.
– Disconnect vacuum hose -7- from combination valve.
– Remove bolts -8-.
– Disconnect connector -9-.
– Remove coolant pipe.
– Remove intake manifold
– Remove cylinder head cover
46
Rep. gr.15 - Cylinder head, valve gear
⇒ page 34 .
⇒ page 34 , Removing, installing and
⇒ page 132 .
⇒ page 30 .