Removing And Installing Left Cylinder Head Cover - Volkswagen Touareg 2003 Workshop Repair Manual

Touareg 2003 ➤
8-cylinder injection engine - Edition 11.2011
– Loosen securing bolts in the sequence -12- to -1- and remove
cylinder head cover.
Installing
Installation is carried out in the reverse order. When installing,
note the following:
Note
Renew gasket if damaged or leaking.
♦
Before installing ensure that all seals between cylinder head
♦
cover and cylinder head are installed correctly and not dam‐
aged.
– Lightly coat transitions -arrows- on sealing surface of cylinder
head with sealant -D 454 300 A2- .
– Carefully install cylinder head cover.
– Tighten securing bolts in the sequence -1- to -12-. Specified
torque: 10 Nm
1.3 Removing and installing left cylinder
head cover
Special tools and workshop equipment required
32
Rep. gr.15 - Cylinder head, valve gear