Removing And Installing Lambda Probes - Volkswagen Touareg 2003 Workshop Repair Manual

19 - Catalytic converter
20 - Starter catalytic converter
❑ Installed in exhaust gas stream of cylinder bank 2.
21 - 25 Nm
22 - Bracket
❑ For supporting gearbox on left.
23 - 25 Nm
24 - Exhaust manifold
❑ For cylinder bank 2.
❑ Removal only possible with engine removed.
❑ Removing ⇒ page 149
25 - Gasket
❑ Renew.
❑ Note installation position.
Removing and installing exhaust manifold
– Oil dipstick guide tube retainer -1- must be removed to enable
removal of cylinder bank 2 exhaust manifold.
– Then disconnect refrigerant line -2- and seal connections with
a clean cloth.
– Now unscrew securing nuts -arrows-.
1.2 Removing and installing Lambda
probes
Special tools and workshop equipment required
8-cylinder injection engine - Edition 11.2011
1. Removing and installing parts of exhaust system
Touareg 2003 ➤
149