The Main Frame - Geeetech Duplicator 5 Assembly Manual

Tips:
1. Before assembly, you are advised to put all the parts, especially the screws and
nuts in order, which would save you much time in looking for the required parts.
2. The part ID is corresponding to the number labeled on the bag of each part.
Some parts may not have labels and you can refer to the pictures on the package list.

2. The Main Frame

In this chapter, an introduction to the main frame of Duplicator 5 is made to get
you to have an in-depth knowledge of 3D printer. At first, please prepare all the panels
by attaching the necessary parts. Secondly, assemble the main frame. Finally, attach
other important parts of Duplicator 5 on the main frame.
Before we start, let's get familiar the panels of the Duplicator 5 3D printer.
5