Preparation - Geeetech Duplicator 5 Assembly Manual

Preparation

1. Unpack the kit and check if all parts are in the box. Please check the condition of
each part since there might be some damage during shipping. To help you with this,
there is BOM in the box and each bag is labeled with its part number.
2. Contact our customer service immediately by email or through the website if you
find any missing or damaged parts. And at the bottom of the BOM, there is a signature
of the checker. Please take a picture of it and attach the picture in your mail.
3. Before your assembly, please read through each chapter of this
assembly manual to gain an overall idea of what is involved and how
long it might take to complete the assembly job.
4. As a preparation job, you can put all the part in order to save your time, especially
the screws and nuts. Do not mix them up.
5. Ensure you have the necessary skills to carry out the assembly job or entrust
someone who does.
6. Work on a big firm table or bench in a clean dry well-lit area.
7. Since this kit contains tiny parts, please keep them away from kids under 3.
8. Ask for help if you run into any problems --- our contact details are on the website
and we will always do our best to solve any problems encountered.
9. for different batches, some parts of the kits may have changed. If the parts
listed in this instruction and what you received is slightly different, please don't
worry. These changes will not affect your installation and usage.
Watch the assemble video here:
https://www.youtube.com/playlist?list=PLODCkot3Griggei
Ht4KxRsgxX2igi8jQ-
3