Product Description; Part Code - KEB COMBIVERT G6 Instructions For Use Manual

PRODUCT DeSCRIPTION

2 Product Description
The product family COMBIVERT G6 has been developed for the universal use at open-
loop three-phase drives. The COMBIVERT G6 can be operated open-loop or encoder-
less speed or torque-controlled. The units are equipped with an integrated EMC filter.
ATTENTION

2.1 Part code

x x G 6 x x x - x x x x
This accompanying instruction manual contains only information for the
installation and connection of the control of the KEB COMBIVERT G6.
Further parts of the installation manual are required depending on the
ordered type:
• Connection and adjustments of the power unit
• Safety function STO
For manuals with general safety requirements and EMC conform instal-
lation please visit www.keb.de.
Heat sink version
1
Control,
Keyboard,
Display
1
Switching frequency;
Short time current limit;
Overcurrent cut-off
1
Voltage /
Connection type
1
Housing
Air-cooling (housing C, E);
0:
Air-cooling / flat rear (housing A, B)
1: Flat rear
A: G6L-G controlled without keyboard/display
B: G6L-G controlled without keyboard/display
2: G6P-S SCL regulated without keyboard/display
2
3: G6P-S SCL regulated with keyboard/display
2
4: G6L-M ASCL regulated without keyboard/display
3
5: G6L-M ASCL regulated with keyboard/display
3
1: 4 kHz / 125% / 150%
2: 8 kHz / 125% / 150%
5: 4 kHz / 150% / 180%
6: 8 kHz / 150% / 180%
9: 4 kHz / 180% / 216%
A: 8 kHz / 180% / 216%
0: 1ph 230 V AC/DC
1: 3ph 230 V AC/DC
2: 1/3ph 230 V AC/DC
3: 3ph 400 V AC/DC
5: 3ph 400 V DC
6: 1ph 230 V AC
Customer-/special version (firmware, hardware,
A-Z:
download)
A, B, C, E
continued on the next page
13