Paper Misfeeds; Label And Envelope Misfeeds - Xerox VersaLink C405 User Manual

Paper Misfeeds

Probable Causes
The paper is not correctly positioned in the
tray.
The paper tray is too full.
The paper guides are not correctly adjusted
to the paper size.
The tray contains warped or wrinkled paper.
The paper is moist from humidity.
Using paper of the wrong size, thickness, or
type.
The feed rollers are dirty.

Label and Envelope Misfeeds

Probable Causes
The label sheet is facing the wrong way in the
tray.
Labels are missing, curled, or pulled away
from the backing sheet.
Envelopes are loaded incorrectly.
Envelopes are wrinkling.
Solutions
• Remove the misfed paper and reposition it properly in the tray.
• Adjust the paper guides in the tray to match the size of the
paper.
Remove some of the paper. Do not load paper past the fill line.
Adjust the paper guides in the tray to match the size of the paper.
Remove the paper, smooth it out, and reload it. If it still misfeeds,
do not use that paper.
Remove the moist paper and replace it with new, dry paper.
Use only Xerox approved paper. For details, refer to
Paper on page 140.
With a clean, lint-free cloth moistened with water, wipe the feed
rollers until they are clean. For details, refer to
on page 159.
Solutions
• Load label sheets according to the instructions from the
manufacturer.
• Load labels in the tray, face up.
For details, refer to Labels
Do not use any sheet where labels are missing, curled, or pulled
away from the backing sheet.
You can print envelopes from the Bypass tray or Tray 1.
For details, refer to Envelopes
• The heat and pressure of the laser printing process can cause
wrinkling.
• Use supported envelopes. For details, refer to
Printing Envelopes on page 151.
Note: When you load envelopes long-edge feed, ensure that you
specify landscape orientation in the print driver.
Xerox VersaLink
® ®
Cleaning the Printer
on page 155.
on page 151.
Guidelines for
C405 Color Multifunction Printer
User Guide
Troubleshooting
Supported
203