Installing A Prru3907 Rf Jumper - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 9-19 Installing a pRRU PGND cable
Figure 9-20 Correct direction for crimping an OT terminal
Step 3 Label the installed cable by following the instructions in 15.5 Attaching a Sign Plate Label.
----End

9.4.7 Installing a pRRU3907 RF Jumper

This section describes the procedure for installing an RF jumper.
Issue 08 (2016-05-30)
Crimp OT terminals in correct directions, as shown in Figure 9-20.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing a pRRU3907 or pRRU3916
193