Dbs3900 Lampsite Engineering Label - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
----End

15.3 DBS3900 LampSite Engineering Label

This section describes the content and presents the exterior of DBS3900 LampSite
engineering labels.
Label Content
The DBS3900 LampSite engineering labels include the RHUB power label, RHUB ground
label, RHUB alarm or monitoring label, RHUB optical transmission label, and RHUB
network transmission label, the pRRU power label, pRRU network transmission label, pRRU
antenna label. The engineering labels are used for DBS3900 LampSite units RHUB and
pRRU for indoor scenarios.
By default, blank labels are delivered for DBS3900 LampSite and must be filled in onsite.
Table 15-3 describes the content of engineering labels.
Table 15-3 DBS3900 LampSite Engineering Label Content
NE
RHUB
Issue 08 (2016-05-30)
Label Content
Power RHUBx
label
PWR
Ground RHUBx
label
PGND
Alarm or RHUBx
monitorin
EXT_AL
g label
M
Optical
RHUBx
transmissi
BBU/RH
on label
UBa/RHU
Bb
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Label for the RHUBx
power cable.
x specifies the number of
RHUBs and cannot exceed
the maximum RHUB
number supported by the
networking.
Label for the RHUBx
ground cable.
x specifies the number of
RHUBs and cannot exceed
the maximum RHUB
number supported by the
networking.
Label for the RHUBx
alarm cable.
x specifies the number of
RHUBs and cannot exceed
the maximum RHUB
number supported by the
networking.
Label for the RHUBx
CPRI cable.

x specifies the number
of RHUBs and cannot
exceed the maximum
15 Appendix
Corresponding
port on the base
station
PWR
EXT-ALM
CPRI0 or CPRI1
276