Installing An Exd3902 On A Pole - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
1.
2.
----End

11.4.3 Installing an EXD3902 on a Pole

This section describes the procedure and precautions for installing an EXD3902 on a pole.
Context
Place a foam pad or cardboard under an EXD3902 to protect the EXD3902 housing from
damage during the installation.
Procedure
Step 1 Determine a position for installing the separate mounting kit, as shown in Figure 11-16.
Figure 11-16 Distance between the separate mounting kit and the ground
Step 2 Install the EXD3902 mounting kit, as shown in Figure 11-17.
Issue 08 (2016-05-30)
Hold the EXD3902, hang the two dowels on the top of the EXD3902 attachment plate
onto the separate mounting kit, and push the EXD3902 until it snaps into place, as shown
by illustrations a and b in Figure 11-15.
Use the M6 inner hexagon screwdriver to tighten the screw on the top of the separate
attachment plate to 7 N· m, as shown by illustration c in Figure 11-15.
It is recommended that the separate mounting kit be 1200 mm (47.24 in.) to 1600 mm (62.99 in.) above
the ground.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 (Optional) Installing the EXD3902 and Cables
223