Huawei DBS3900 Installation Manual page 282

DBS3900 LampSite
Installation Guide
Figure 15-4 Inserting wires into the RJ45 connector

When inserting the wires, ensure that the braided layer that was tipped outwards has
inserted inside the connector.

Observe the side or front of the RJ45 connector to ensure that the core wires are inserted to
the bottom of the RJ45 connector.
Step 4 Use a crimping tool to crimp the connector. See Figure 15-5.
Figure 15-5 Crimping the connector
Step 5 Use a cable cutter to evenly cut off the protruding braided layer of the connector along the
wire holder. See Figure 15-6.
Figure 15-6 Cutting off the excess braided layer
Issue 08 (2016-05-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 Appendix
275