BTS3900
Hardware Description
5.9.2 Inter-RFU RF Signal Cable
The inter-RFU RF signal cable is used for transmitting the received diversity signals between
two RFUs. The cable connects the RX IN port on one RFU and the RX OUT port on another
RFU.
5.9.1 RF Jumper
The RF jumper connects the RFU and the feeder of the antenna system for signal exchange
between the base station and the antenna system.
Exterior
Figure 5-119
Figure 5-119 RF jumper
(1) DIN straight male connector
5.9.2 Inter-RFU RF Signal Cable
The inter-RFU RF signal cable is used for transmitting the received diversity signals between
two RFUs. The cable connects the RX IN port on one RFU and the RX OUT port on another
RFU.
Structure
Figure 5-120
Figure 5-120 Inter-RFU RF signal cable
(1) QMA elbow male connector
Issue 04 (2011-02-15)
shows an RF jumper.
NOTE
Macro base stations use super-flexible 1/2-inch jumpers.
shows the inter-RFU RF signal cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) DIN elbow male connector
5 BTS3900 Cables
5-91