Closing The Cover Plate Of A Prru Cabling Cavity - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 9-28 Installing an Ethernet cable
(1) Ethernet cable
----End
Follow-up Procedure
1.
2.

9.4.11 Closing the Cover Plate of a pRRU Cabling Cavity

This section describes the procedure for closing the cover plate of a pRRU cabling cavity.
Issue 08 (2016-05-30)
The connection mode of CPRI_E0 port is the same to that of CPRI_E1 port on pRRU, and this chapter
uses CPRI_E0 as an example.
Route the cable by following the instructions in section 9.4.1 Cabling Requirements and
use cable ties to bind the cable.
Label the installed cable. For details, see section 15.5 Attaching a Sign Plate Label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing a pRRU3907 or pRRU3916
(2) CPRI_E0 port on the pRRU
202