Huawei DBS3900 Installation Manual page 280

DBS3900 LampSite
Installation Guide
Figure 15-1 Components of an RJ45 connector and an Ethernet cable
(1) Core
wire
Procedure
Step 1 Remove the outer jacket (25 mm) of the Ethernet cable, tip the braided layer outwards evenly,
and cut off the aluminum foil and guard space. See Figure 15-2.
Figure 15-2 Removing the jacket of an Ethernet cable
Issue 08 (2016-05-30)
(2) Aluminum
foil
 Do not damage the shield layer when removing the jacket.
 Do not damage the insulation layer of the Ethernet cable when removing the shield layer.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(3) Braided (4) Outer
layer jacket
15 Appendix
(5) RJ45
connector
273