Huawei DBS3900 Installation Manual page 165

DBS3900 LampSite
Installation Guide
5.
----End
Issue 08 (2016-05-30)
Figure 8-52 Shaping the mastic cement between cables
Compress and flatten the mastic cement until the Ethernet ports are fully covered and
sealed. Nip the mastic cement from the connector side upwards along the cables until 10
mm high, as shown in Figure 8-53. This ensures that the mastic cement envelop does not
crack in case the cable is bent.
Figure 8-53 Fully sealed Ethernet ports
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing a pRRU3902 or pRRU3911 or
pRRU3911+WIFI
158