Installing A Pgnd Cable - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 9-18 pRRU cable installation process

9.4.6 Installing a PGND Cable

This section describes the procedure for installing a PGND cable.
Procedure
Step 1 Prepare a pRRU PGND cable.
1.
2.
Step 2 Install the pRRU PGND cable.
Connect one end of the PGND cable with an M6 OT terminal to the ground terminal at the
RRU bottom and the other end of the cable with an M8 OT terminal to the external ground bar,
as shown in Figure 9-19.
Issue 08 (2016-05-30)
Cut the cable to a length suitable for the actual cable route.
Add OT terminals to both ends of the cable by following the instructions in Assembling
the OT Terminal and the Power Cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing a pRRU3907 or pRRU3916
192