Table of Contents
Advertisement
If no key is activated for 1 minute, the display will return to the default
state 1.0 without saving configuration changes.
1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Accept the chosen value and proceed to the next menu
Hold 3 Back to previous menu / return to menu 1.0 without saving
Power up
Directly to [EN.SIL]
if SIL-lock is enabled
0000
9999
1 2
3
™›
0000
— ON
PASSW.
˜ OFF
Txt 1
1.1
1.0
1.0 = Default state
Linie 1 shows status for channel 1
and channel 2.
Linie 2 shows output status for
channel 1, output current or tag no.
Linie 3 shows output status for
channel 2, output current or tag no.
Line 4 indicates whether the module
is SIL-locked.
1.1 = Only if password-protected.
1.2 If password has been set.
Line 1 symbols:
= OK. Flashing
™
Line 2 and 3 symbols:
— ON = channel 1 ON
˜ OFF channel 2 OFF.
Line 4 symbols:
Static dot = SIL-locked.
Flashing dot = Not SIL-locked.
= output is active.
9203 Solenoid / Alarm Driver
routing diagram
NO
YES
1 2
1 2
3
3
NO
DIR
ADV.SET
CH1.FUN
Txt 2
Txt 7
3
YES
ADV.SET
Txt 2
= error.
œ
Version No. V3R0
DIR
DIR
INV
INV
1 2
3
DIR
CH2.FUN
Txt 7
To default state 1.0
Continued on the page
Routing diagram ADV.SET
Safety Manual
3
11
Advertisement
Table of Contents
