Advertisement
14' Jolly Boat / Cutter:
Referring to (Fig 011 & Photos 072 – 080), the jolly boat / cutter (192) is assembled in the same way as the launch with the
following exceptions:
1.
The first rib to be fitted should be 19mm from the transom.
2.
The rubbing strakes are positioned 1.5mm below the top of the cutter's side.
3.
There are only four thwarts.
4.
There are only four rowlocks, two per side alternating as shown.
5.
There are no bottom boards.
6.
There are no knees.
Fig 011
©
2006 JoTiKa Ltd.
63
Advertisement
